Our office at All Aces Services recently received a call from CY regarding our vinyl cleaning services. During this call we learned that the vinyl at their offices, which is located in Caloundra, were in desperate need of cleaning. We proceeded to offer CY our eight step cleaning process for vinyl. This system is so long lasting that if it is maintained properly, the floor will never have to be stripped and cleaned again.
Vinyl Cleaning Process
Here is our eight step system which we used to clean the vinyl at CY.
- Pre-inspect the floors to anticipate any problems.
- Dust mop the floors.
- Apply cleaner to remove any scuff marks which may be on the flooring.
- Use a rotary agitation of old sealer to loosen and dissolve any soil.
- Extract any standing water, and old sealer.
- Apply the base coats to the floors.
- Apply our quality sealer to the floors.
- Dry between each and every coat with high speed air movers.
This eight step process, which is used by All Aces for vinyl flooring, will help make sure that the floor never gets into a really ugly state. The job at CY was successful, and the client reports that they will happily use our services again. Keep the following information in mind when caring for floors.
Daily to Weekly Cleaning for Wood, Vinyl, and Grout:
- Mop up any spills immediately.
- All Aces Services recommends using microfibre mopping systems with Solutions Natural Clean
- Use a small amount of Natural Clean in a spray bottle diluted with water in a ratio of 80:1 (1 part Natural Clean to 80 parts water) – Natural Clean is extremely concentrated
- With the Micro Fibre Mopping System make sure you complete a figure 8 mopping passes from side to side (do not push back and forwards) only side to side in a figure 8 motion. Follow the advised instructions below for best results.
- Dust/Mop the area with the microfibre mopping system.
- Spray Natural Clean (diluted with water) onto the floor.
- Mop the area with the microfibre mopping system.